Apoc Silicone Armor Flex, 5 Gal

Apoc Silicone Armor Flex, 5 Gal

$274.99

SKU: 755. Categories: , , .

Product Description

 

Great for Roofs with Heavy Ponding Water

Great for Roofs with Heavy Ponding Water

Apoc Silicone Armor-Flex is a moisture cured, high solids Silicone based coating that is enhanced with Nano-Sealant Technology to provide the ultimate barrier and protection from the elements; including protection from the Sun, Rain, Ice, Wind and Snow. This high performance coating provides a reflective and protective barrier that cools roof surfaces, helps reduce utility costs and greatly extends the life of your roof. Unlike Traditional Acrylic or Silicone coatings, Armor-Flex is manufactured using a cross linked, Nano-Sealant Technology which produces an “Environmentally Green Product” that outperforms solvent based, urethane and older technologies that have negative impacts on the environment, air quality and global warming. This scientifically generated formulation creates a virtually indestructible coating to weather that will resist ponding water conditions.

 

Features

  • 50-year limited warranty
  • Waterproofing in a day
  • 96% Solids
  • Great for Roofs with Heavy Ponding Water
  • Reduces energy costs

 

Material Warranty

50 Yr Warranty
20 Yr NDL Warranty – covers both material & labor. Available only for Commercial Roofs

Compliance:

CRRC, Energy Star, Maimi-Dade, FP&L, Title 24.

Precautions

Do not store at temperatures below 35°. Keep closed when not in use. When transporting this product, ensure that lid is tight and pail secured. Do not allow pail to tumble as this may cause lid to loosen and leakage to occur. Do not transport on passenger seats or inside the passenger compartment of any vehicle. Store product in the cargo area of vehicle, and secure over protective cloths to prevent damage due to accidental spills. The manufacturer also disclaims liability for flat surface application where poor drainage or ponding of water may prevail. Do not reuse empty container. Dispose of in an environmentally acceptable manner. Do not use in drinking water or food systems. Seal container when not in use.

Approx. Shipping Weights:

Note: All approx. weights include container.

  • 5 gallons (18.9L) 53.5 lbs.
  • 50 gallon drum (208.2L) 540 lbs.

Product Spec Sheet

For Exterior Use Only

Use with adequate Ventilation Keep Out of Reach of Children VOCJVOS- 10 g/l max. CALIF. PROP. 65 • CHEMICAL WARNING (CALIFORNIA HEALTH AND SAFETY CODE #25249g.5 ET SEQ).

 

WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or reproductive harm. Use proper protection and adequate ventilation, when using product.

CAUTION!: HARMFUL OR FATAL IF SWALLOWED. EYE, SKIN AND RESPIRATORY IRRITANT. If swallowed DO NOT induce vomiting. Call physician immediately. In case of: Eye contact- flush with large amounts of room temperature water for 15 minutes. Skin contact- wash thoroughly with soap and water. Irregular or stopped breathing; administer oxygen, give artificial respiration. Get medical attention (immediately). Avoid prolonged breathing of vapor or spray mist. (NIOSH/ MSHA TC 23C or equivalent).

Warranty & Disclaimer

Cool Roof Store warrants to the original purchaser, that this product is free from any manufacturing defects that will materially affect the products performance for a period of one year. In the event there is a failure associated with a manufacturing defect of this product, Cool Roof Store shall, at its discretion, provide the appropriate replacement product(s) or pay for the cost of the defective product only. There is no warranty for labor or installation costs of any kind. To the best of our knowledge, the technical data contained herein is true and accurate at the date of issuance and is subject to change without prior notice. Contact Cool Roof Store prior to ordering for the more recent and up to date data sheet. For additional limited warranty and disclaimer information, contact Cool Roof Store at 591-1900.

 

Typical Physical & Performance Characteristics

Solids by Weight 96±2%
Solids by Volume* 96±2%
Density 10.7lbs/gal
Elongation (ASTM D-2370) 210%
Tensile Strength (ASTM D-2370) 450 psi.
Tear Resistance (ASTM D-624) 37
Reflectivity .70 aged 3 yr
Emissivity .90 aged 3 yr
SRI Value 110 Initial
Water Absorbtion (ASTM D-471) .1% after 2 weeks at 75°F
Permeability (ASTM E-96) 5.9 perms
Weathering No degradation after 5000 hrs
Tack Free Time 1 hour
VOC 10 g/L
Durometer Hardness 50± 5 pts
Maximum Continuous Surface Temp 185°F
Flash Point >290°F
Cure Time Min 2 hours – Max 8 hours
Shelf Life 12 months (when unopened)
Max Service Temp. (continuous) 185°F

 

Application

Preparation

All surfaces must be dry and free of dust, dirt, rocks, oil, loose materials, gravel, peeling paint and all other foreign matter. Rusty metal must be cleaned with a wire brush and primed with approved primer prior to application of this product. Surfaces with mildew growth or stains must be cleaned with a bleach solution (2 parts water to one par bleach) prior to applying this product. Rinse thoroughly. Pressure washing entire surface is recommend for best results (use only a wide fan tip after repairs have been made and have cured – do not allow stream to tear into roof surfaces). Repair all leaks and cracks with APOC 264 Liquid Flash n Seal and Reinforcing Roof Fabric. Allow to cure a minimum of 4 hours before application of roof coating. Surfaces previously coated with aluminum or asphalt should be allowed to cure for a minimum of one summer season prior to coating with this product..

Clean-up

Clean tools with soap and water.

Spray Info

3500 PSI at tip., .030 -, .041 Tip Size, 3 GPM, 3/4″ min hose size.
Product Spec Sheet
 

APPLICATION

crs-brisann For exterior use only. Do not heat over 130°F or thin. Rain, dew, fog, frost and relative humidity greater than 90% will result in adhesion problems and reduced performance characteristics of the finished coating. Do not apply if these conditions exist at the time of completed application. Protective clothing and eye wear should be used during application. Application should be completed with air, surface and material temperatures are 55°F (for 24 hours) but not above 190°F. Application can take place at colder temperatures (above 35°F) however, precautions must be taken to ensure there is NO MOISTURE, DEW OR FROST present on the roof. Apply with a 3/8″ nap exterior paint roller or professional airless sprayer. Apply a uniform coat over entire surface, avoiding excessive rolling. Dries for finish coat in 2-4 hours and fully cures in 8 hours at 70°F and 50% relative humidity. Thicker films, poor air flow and low humidity will increase dry times. Coverage rate is 1 gallon per square per coat. Two coats are recommended for warranty protection. Second coat should be applied between 4-24 hours after first coat.

Can Be Used Over:

  • Flat Roofs
  • Build up Asphalt
  • Asphalt Shingles
  • Aluminum Shingles
  • Metal Roofs
  • And Much more

 

Note

If roof becomes hot (over 190° F) during application, wait for roof to cool. Do not apply to wet surface. If roof surfaces become soiled as they age, due to elements, Elastomeric can be cleaned with a mild water and bleach solution. Excessive scrubbing should be avoided.

Approx. Shipping Weights:

Note: All approx. weights include container.

  • 5 gallons (18.9L) 53.5 lbs.
  • 50 gallon drum (208.2L) 540 lbs.

Reviews

There are no reviews yet.

Be the first to review “Apoc Silicone Armor Flex, 5 Gal”